基于LS_DYNA的掘進機截齒有限元分析
Abstract：To determine the force, stress distribution and breaking causes of roadheader picks, loadings on a
single pick are simulated with MATLAB, and the explicit dynamic analysis of the pick during whole cutting
operation is carried out with ANSYS/LS-DYNA. The results show that the force on the pick varies with the
thickness of the cutting scrap, and both the maximum deformation and the maximum stress appear at the head
of the pick. The study results offer theoretical references for the further structural improvement of the pick.
Keywords：roadheader; pick; LS-DYNA; FEA
截齒作為掘進機上的主要工作部件，是反映掘進
機截割效率高低的關鍵。分析巖石掘進機截齒
的載荷、受力情況與應力分布，對于研究巖石截割時
截齒的失效原因與破壞機理，改進截齒的設計，提高
其使用壽命和工作可靠性，解決巖石掘進機的截割效
率與經濟效益，具有重要意義[1]。
載荷模擬和計算機技術的發展為截齒截割巖石
的研究提供了新的途徑。文獻 [1] 利用 MATLAB 對
掘進機截齒進行了載荷模擬，文獻 [2] 利用 ANSYS/LS-DYNA 對潛孔鉆頭的破巖過程進行了仿真分析，
文獻 [3] 利用 LS-DYNA3D 對沖擊載荷下潛孔錘鉆頭
硬質合金球齒的沖擊鉆進混凝土過程進行了仿真。筆
者通過 MATLAB 軟件模擬載荷，確定 EBZ160 型懸
臂式縱軸掘進機單個截齒在橫切工況下截割巖石時的
載荷，并利用 ANSYS/ LS-DYNA 軟件對截齒進行有
限元分析。 ...
熱門關鍵詞：
豫公網安備 41072402000322號
